商品混凝土搅拌站面临着激烈的市场竞争，为了在市场竞争中提高搅拌站竞争力，须加强混凝土搅拌站生产与运输过程中的成本控制。现在我们一起来看看搅拌一体车能从哪些方面把搅拌车油耗降到很低。八大招教你将搅拌车油耗降到较低！如下：

The commercial concrete mixing plant is facing fierce market competition. In order to improve the competitiveness of the mixing plant in the market competition, it is necessary to strengthen the cost control in the production and transportation process of the concrete mixing plant. Now let's take a look at how the mixer can reduce the fuel consumption of the mixer to a very low level. Eight tips to reduce the fuel consumption of mixer truck! As follows:

1、在行驶中发现搅拌车现在的滑行距离明显减少，这时司机们应该检查一下搅拌车的轮胎气压是否合乎气压标准。若轮胎充气不足，耗油量也会增加。

1. When driving, it is found that the taxi distance of the mixer is obviously reduced. At this time, drivers should check whether the tire pressure of the mixer meets the pressure standard. If the tire is under inflated, the fuel consumption will also increase.

提示：适时为轮胎充足气。

Prompt: Fill the tire with sufficient air at the right time.

2、检查搅拌车轮胎的磨损程度，如果轮胎磨损严重时，就会经常出现打滑现象，增加耗油量。

2. Check the wear of the tires of the mixer truck. If the tires are seriously worn, they will often slip and increase fuel consumption.

提示：必要时可更换的轮胎。

Tips: tyres that can be replaced if necessary.

3、在搅拌车行驶中或启动时发现车轮有异常响声，网友们应该及时检查轴承及刹车系统是否有故障。如果车轮转动不正常，就会影响搅拌车的车速，使油耗加大。

3. If the wheels make abnormal noise when the mixer is running or starting, netizens should timely check whether the bearing and brake system are faulty. If the wheels do not rotate normally, it will affect the speed of the mixer and increase the fuel consumption.

提示：检修轴承及刹车系统。

Prompt: overhaul the bearing and brake system.

4、搅拌车离合器打滑会使发动机的转数丢失。当您在急加速时发现搅拌车发动机转速表增加很快，但车速增加却很慢，这时可以判定是离合器打滑了。

4. The slipping of the mixer truck clutch will cause the loss of engine revolutions. When you accelerate rapidly, you find that the engine tachometer of the mixer truck increases rapidly, but the speed increases slowly. At this time, it can be determined that the clutch is slipping.

提示：需要更换离合器片，离合器压盘和驱轮。

Prompt: It is necessary to replace the clutch plate, clutch pressure plate and drive wheel.

5、当搅拌车已经行驶二三十万时，通常会出现汽缸压力不足的现象，这时油耗会明显增加。

5. When the mixer has driven 230000 kilometers, the cylinder pressure is usually insufficient, and the fuel consumption will increase significantly.

提示：如果真的出现这种故障，那么搅拌车发动机就需要大修了。

Prompt: If such a fault occurs, the mixer engine needs to be overhauled.

6、当排气管出现冒黑烟、油耗增D的现象时，需要检查化油器。

6. When the exhaust pipe emits black smoke and the fuel consumption increases by D, the carburetor needs to be checked.

提示：如果化油器太脏可以用清洗剂直接向化油器进气口喷一喷，若此时还冒黑烟，那只能把化油器拆开清洗了。

Tip: If the carburetor is too dirty, you can spray detergent directly on the carburetor air inlet. If there is black smoke at this time, you can only disassemble the carburetor for cleaning.

7、如果搅拌车火花塞使用的时间太长，也会出现油耗加大的现象。因为搅拌车火花塞损坏会使点火的N量下降，车提速减慢，导致油消耗明显增加。

7. If the spark plug of the mixer truck is used too long, the fuel consumption will also increase. Because the damaged spark plug of the mixer will reduce the amount of ignition N, slow down the car's acceleration, and lead to a significant increase in oil consumption.

提示：应该换搅拌车火花塞了。

Tip: The spark plug of the mixer truck should be replaced.

8、当搅拌车的温控开关和节温器损坏时，会出现油耗增加的现象。因为搅拌车的温控开关和节温器损坏会使水温降低，化油器不能正常工作，导致搅拌车油雾化不好，油耗量明显增加。

8. When the temperature control switch and thermostat of the mixer are damaged, the fuel consumption will increase. Because the temperature control switch and thermostat of the mixer are damaged, the water temperature will be lowered, and the carburetor will not work normally, resulting in poor oil atomization of the mixer and a significant increase in oil consumption.

提示：定期检查温控开关和节温器。

Tip: Check the temperature control switch and thermostat regularly.

八大招教你将搅拌车油耗降到较低就是以上的内容了，您对此有什么想咨询了解的，就来我们网站http://www.jfhntjbc.com进行咨询吧！

Eight tips to reduce the fuel consumption of the mixer are the above. If you have any questions about this, please come to our website http://www.jfhntjbc.com Consult!