自动上料搅拌车手刹的使用率非常高，但手刹的效果会随使用次数的增加而下降。由于平时保养不当，有时候自动上料搅拌车手刹已经拉上了，却起不到真正制动的作用，这也是车辆的重大隐患，所以应该定期对自动上料搅拌车手刹进行维护保养。

The use rate of the hand brake of the automatic feeding mixer is very high, but the effect of the hand brake will decline with the increase of the use times. Due to improper maintenance at ordinary times, sometimes the hand brake of the automatic feeding mixer has been pulled, but it can not really brake, which is also a major hidden danger of vehicle safety. Therefore, the hand brake of the automatic feeding mixer should be regularly maintained.

①进行自动上料搅拌车手刹工作点位置确认

① Confirm the position of the manual brake working point of the automatic feeding mixer

一般来说当自动上料搅拌车手刹手柄拉到整个行程的70%时，自动上料搅拌车手刹系统就应该处于正常的刹车位置。我们在日常使用中，先应该先找出这个刹车工作点，可以通过数棘轮的响声数量来确定，一般5格到8格之间是正常的刹车位置。

Generally speaking, when the hand brake handle of the automatic feeding mixer is pulled to 70% of the whole stroke, the hand brake system of the automatic feeding mixer should be in the normal braking position. In daily use, we should first find out the working point of the brake, which can be determined by counting the number of ratchet sounds. Generally, the normal brake position is between 5 and 8 grids.

②进行刹车效果确认

② Confirm the braking effect

把自动上料搅拌车开到坡度比较大、路面状况比较好的斜坡上，踩住车辆刹车，挂空挡，将自动上料搅拌车手刹手柄拉到工作点位置。慢慢松开脚刹（注意一定要慢，保证），如果自动上料搅拌车没有发生滑动，就说明自动上料搅拌车手刹的效能良好。

Drive the automatic feeding mixer to a slope with large gradient and good road condition, step on the vehicle brake, shift to neutral gear, and pull the hand brake handle of the automatic feeding mixer to the working point. Slowly release the foot brake (be careful to be slow to ensure safety). If the automatic feeding mixer does not slide, it means that the hand brake of the automatic feeding mixer is in good performance.

③进行自动上料搅拌车手刹的灵敏度测试

③ Carry out sensitivity test on hand brake of automatic feeding mixer

选一段平坦的路面，在路面上慢速行驶，轻轻地提拉手刹手柄，感觉一下自动上料搅拌车手柄的灵敏度和接合点。如果发现自动上料搅拌车手刹的制动效能或灵敏度不够理想，有经验的司机可以自行调节手刹的刹车线，也可以将自动上料搅拌车开到就近的维修站，让维修人员帮忙调整。

Select a flat road surface, drive slowly on the road surface, gently lift and pull the hand brake handle, and feel the sensitivity and joint point of the handle of the automatic feeding mixer. If it is found that the brake efficiency or sensitivity of the hand brake of the automatic feeding mixer is not ideal, experienced drivers can adjust the brake line of the hand brake by themselves, or they can drive the automatic feeding mixer to the nearest maintenance station for maintenance personnel to help adjust.

自动上料搅拌车手刹的检查事项基础事项就是这样了，为了各方面的您就要多加的了解注意事项，这样才能更好的去完成工作。更多相关内容就来我们网站http://www.jfhntjbc.com进行咨询吧！

This is the basic inspection items for the hand brake of the automatic feeding mixer. For the safety of all aspects, you should know more precautions, so that you can better complete the work. More relevant content will come to our website http://www.jfhntjbc.com Consult!