自动上料搅拌车是由专用车底盘和上装两大部分组成的，今天我们就来看看自动上料搅拌车的上装主要是有哪些部件组成的。

The automatic feeding mixer is composed of two parts: the chassis and the upper part. Today, we will take a look at the upper part of the automatic feeding mixer.

搅拌罐：搅拌罐可以说是整个上装的核心部分，它的技术含量高、公差范围小、精度要求高，它的性能直接影响预拌混凝土的质量。

Mixing tank: it can be said that the mixing tank is the core part of the whole upper deck, with high technical content, small tolerance range and high precision requirements. Its performance directly affects the quality of ready mixed concrete.

搅拌车车架：车架分为前座、后座及副车架，副车架形式为前后贯通式，采用全封闭矩形管结构或者钢板压制成槽型，材料为高强度钢材，具有强度高、稳定性好等优点。

Mixer truck frame: the frame is divided into front seat, rear seat and subframe. The subframe is a front and rear through type, which is made of fully enclosed rectangular tube structure or steel plate pressed into a groove. The material is high-strength steel, which has the advantages of high strength and good stability.

进料系统：出料口为漏斗形状，在易磨损的地方进行局部加强，因其内部空间大，易于搅拌罐进料口的残余物，其角度的设计合理，进料速度快，不易发生堵塞及卡死现象。

Feeding system: the discharge port is in the shape of a funnel, which is locally strengthened at the places where it is easy to wear. Because of its large internal space, it is easy to remove the residues at the feed port of the mixing tank. The design of its angle is reasonable, the feeding speed is fast, and it is not easy to block and jam.

出料系统：出料槽能在水平方向180度旋转，每隔20度就有一个限位装置，垂直方向用压缩弹簧式，自由升降，以便使用不同场所的卸料要求。

Discharge system: the discharge chute can rotate 180 degrees in the horizontal direction, and there is a limit device every 20 degrees. The vertical direction uses the compression spring type, which can rise and fall freely, so as to use the discharge requirements of different places.

操纵系统：搅拌车的操纵系统采用定位准确、控制可靠的杆系控制系统，控制点分别在驾驶室内、车尾两侧共三处，驾驶室内的操作杆也可控制搅拌罐的转向，以确保车辆行驶过程中搅拌罐处于转动状态。

Operating system: The operating system of the mixer truck adopts a linkage control system with accurate positioning and reliable control. The control points are located in the cab and at two sides of the rear of the truck. The operating lever in the cab can also control the steering of the mixing tank to ensure that the mixing tank is in a rotating state during vehicle driving.

液压系统：搅拌车的液压驱动方式采用手动伺服变量轴向柱塞泵和定量柱塞泵马达及减速机组成闭式液压传动系统，可无级正反转变速，调节控制方便。

Hydraulic system.

供水系统：搅拌车的供水系统采用气压是供水，压缩气体有主车储气筒经单回路保护阀、气源开关、减压阀、单向阀压力水箱，水箱中的水压入水管，水的冲洗压力可调整，软管和冲洗装置的搭配可方便车辆的冲洗。

Water supply system: The water supply system of the mixer truck uses air pressure to supply water. The compressed gas is from the main vehicle air reservoir to the pressure water tank through the single circuit protection valve, air source switch, pressure reducing valve, one-way valve. The water pressure in the water tank enters the water pipe. The water flushing pressure can be adjusted. The hose and flushing device can be used to facilitate the vehicle flushing.

自动上料搅拌车的上装明显的标志就是搅拌罐，搅拌车的上装还包括车架、进出料系统、操作系统、液压系统、供水系统，具体如上述所讲解的内容，您对此有什么需求可以随时来我们网站http://www.jfhntjbc.com咨询！

The obvious sign of the automatic loading mixer is the mixing tank. The loading of the mixer also includes the frame, the feeding and discharging system, the operating system, the hydraulic system, and the water supply system. As explained above, you can come to our website at any time if you have any needs http://www.jfhntjbc.com consulting service