自动搅拌车的出现和使用，能够为各类工程施工提供了诸多的便利，这些都是自动上料搅拌车的功劳，那么你知道导致自动搅拌车离合器过热或烧损的原因吗？下面简单来讲讲。

The appearance and use of the automatic mixer can provide a lot of convenience for various engineering construction, which is the result of the automatic feeding mixer. Do you know the cause of overheating or burning of the clutch of the automatic mixer? Let's talk about it briefly.

动力换挡变速器离合器接合时，液压油的压力克服弹簧力压紧摩擦片，随着液压油压力的升高，摩擦片与金属盘接触并逐渐压紧，使离合器将飞轮动力平稳地传递到变速器输人轴，每次换挡时，摩擦片都要与钢片发生摩擦，产生的热量由冷却液散发出去。

When the clutch of the power shift transmission is engaged, the pressure of the hydraulic oil overcomes the spring force to compress the friction plate. With the increase of the hydraulic oil pressure, the friction plate contacts the metal plate and gradually compresses, so that the clutch smoothly transmits the flywheel power to the transmission input shaft. Each shift, the friction plate will rub with the steel plate, and the heat generated will be dissipated by the coolant.

当摩擦片及钢片变薄时，为了使它们充分接合就需要更多的液压油，发动机须进一步加速，摩擦片在钢片上的打滑时间也随之延长，由此产生的摩擦热量也会更多，促使液压油的温度增加，当达到足以改变变速器中密封件性能的温度时，变速器就会产生内泄，而内泄又从两个方面继续引起热量的增加：

When the friction plate and steel plate become thinner, more hydraulic oil is required to make them fully engaged. The engine must further accelerate, and the sliding time of the friction plate on the steel plate will also be extended. The resulting friction heat will also be more, which will increase the temperature of the hydraulic oil. When the temperature is enough to change the performance of the seals in the transmission, the transmission will produce internal leakage, which will continue to cause the increase of heat from two aspects:

高压油经损坏的密封处泄漏，使油温继续升高;由于漏油，液压泵势必要输送更多的油液来保证接合离合器时所需的压力，使离合器充分地接合，这也要求发动机继续加速，使液压泵产生更大的流量，如此恶性循环，必将导致离合器过热或烧损，直完全失效。

The high pressure oil leaks through the damaged seal, causing the oil temperature to continue to rise; Due to oil leakage, the hydraulic pump must deliver more oil to ensure the pressure required for engaging the clutch, so that the clutch can be fully engaged. This also requires the engine to continue to accelerate, so that the hydraulic pump can generate greater flow. Such a vicious cycle will inevitably lead to overheating or burning of the clutch until it is completely ineffective.

在使用的程度上提升了自动搅拌车的作业效率，使用人员要想保障自动上料搅拌车的使用性能，其中每一种配件就要多加注意。更多相关内容就来我们网站http://www.jfhntjbc.com咨询了解吧！

The operation efficiency of the automatic mixer has been improved in the degree of use. Users should pay more attention to each kind of accessories if they want to ensure the performance of the automatic feeding mixer. More relevant content will come to our website http://www.jfhntjbc.com Ask and understand!