自动上料搅拌车广泛用于基础、灌桩、楼板、路面、场坪、护坡、沟渠、河道、桥梁、涵洞、隧道、中小型水库等中小型工程。为了更好的使用设备，用户们在购买设备时须要对企业的产品性能、质量及服务作深入了解。接下来主要讲一下关于自动上料搅拌车的调试条件。

The automatic feeding mixer is widely used in small and medium-sized projects such as foundation, grouting pile, floor slab, pavement, yard, slope protection, ditches, rivers, bridges, culverts, tunnels, and small and medium-sized reservoirs. In order to better use the equipment, users need to have a deep understanding of the product performance, quality and service of the enterprise when purchasing the equipment. Next, we will mainly talk about the commissioning conditions of the automatic feeding mixer.

1、需调试设备各部件、附件及随机东西应按标准装备齐全。

1. All parts, accessories and accompanying items of the equipment to be commissioned shall be complete as per the standard.

2、备好液压油和润滑油脂，液压油的油质应符合要求。

2. Prepare hydraulic oil and lubricating grease, and the oil quality of hydraulic oil shall meet the requirements.

3、按规定加注液压油、燃油、润滑油和冷却水，且液压油加规定油面。

3. Fill the hydraulic oil, fuel, lubricating oil and cooling water as required, and add the hydraulic oil to the specified oil level.

4、应对混凝土泵进行检查、调试和试运转，使之进入正常作业状况，液压体系调试后应符合标准。

4. The concrete pump shall be inspected, debugged and commissioned to make it work normally. The hydraulic system shall meet the standards after commissioning.

5、调试用自动上料搅拌车管管路管径为125。

5. The pipe diameter of automatic feeding mixer for commissioning is 125.

6、实验混凝土应符合标准。

6. The experimental concrete shall conform to the standard.

7、设备应安放在平整坚实的地面上。

7. The equipment shall be placed on a flat and solid ground.

注意：

be careful:

打火前先查验机油、防冻液、润滑油和冷却水等，发觉不够时，应再次进行加上。

Before ignition, check the engine oil, antifreeze, lubricating oil and cooling water, and add them again if insufficient.

自动上料搅拌车开启后，再让罐子低速旋转，围绕着车查验轮胎气压，是不是有漏气的胎，再用螺丝刀剔掉在胎缝中的碎石子，查验。

After the automatic feeding mixer is started, let the tank rotate at a low speed, check the tire pressure around the vehicle to see if there is a leaking tire, and then use a screwdriver to remove the gravel in the tire seam for inspection.

查验灯光，尤其是腰灯，尽量保障照着车胎边缘，施工工地会经常乱堆放钢筋之类的物品，而胎侧是较薄弱的。

Check the light, especially the waist light, to ensure that it can shine on the edge of the tire as much as possible. The construction site will often pile up reinforcement and other items, and the tire side is weak.

用毛巾擦干净两边的后视镜，窗户玻璃，施工工地路况复杂，光线不太好，视野要保障。

Wipe the rear-view mirrors and window glass on both sides with a towel. The road conditions on the construction site are complex and the light is not good. The vision should be guaranteed first.

用户们除了对在购买产品时需严格检验以外，其实在日常保养问题上也是不可缺少的必要工作，这样才能达到在操作过程中使用轻松且使用寿命更长的理想效果。关注我们http://www.jfhntjbc.com，了解更多相关的注意事项！

In addition to strict inspection when purchasing products, users are also indispensable and necessary for daily maintenance, so as to achieve the ideal effect of easy use and longer service life in the process of operation. Follow us http://www.jfhntjbc.com , learn more about precautions!