In fact, the consumption of production water in concrete mixer is not the main link of water consumption. Because the concrete is very difficult to deal with after setting, it needs a lot of water to wash the mixer and cement tank truck every day. So how should we control the water consumption of concrete mixer truck? I'll take you to know.

1.通过提高外加剂的掺量或使用高的效率高减水率的外加剂，选择适应性较好的外加剂和水泥品种。改良砂石级配，找出每个配合比的较佳砂石级配来改良和易性，从而减少用水量。

1. By increasing the dosage of admixtures or using admixtures with high efficiency and water reducing rate, the admixtures and cement varieties with good adaptability should be selected. Improve the sand and stone gradation, find out the better sand and stone gradation of each mix proportion to improve the workability, so as to reduce the water consumption.
             

2.要严格检测各材料性能控制好以上各因素来降低用水量。通过使用高掺量的胶凝材料来改良和易性。多检测砂石的含水率，增强责任心，确保每次产出混凝土的坍落度在控制范围内。

2. Strictly test the performance of each material and control the above factors to reduce the water consumption. Through the use of high content of cementitious materials to improve the workability. More detection of the moisture content of sand and gravel, enhance the sense of responsibility, to ensure that the slump of each output concrete within the control range.

3.与混凝土搅拌车工地施工方沟通很重要，要获得施工人员的理解，多与施工方技术人员进行配合避免坍落度过大。正确的认识：并非坍落度越大，泵送就会越容易，而应调整和易性及碎石用量来调整。

3. It is very important to communicate with the Construction Party of the concrete mixer truck site. It is necessary to obtain the understanding of the construction personnel and cooperate with the technical personnel of the construction party to avoid excessive collapse. Correct understanding: it is not that the greater the slump is, the easier the pumping will be. It should be adjusted by the workability and the amount of crushed stone.

感谢您的阅读，希望以上内容能对您有所帮助，如您想了解更多精彩内容请多多关注我们的网站。

Thank you for reading, hope the above content can help you, if you want to know more wonderful content, please pay more attention to our website.