自动上料搅拌车发动机如何清洗?
概述: 直接将自动上料搅拌车发动机外部清洗剂均匀喷洒于浸湿后,搅拌车发动机及引擎室周边,待三分钟后,用纤维毛刷清洗引擎室内所能触及到的
直接将自动上料搅拌车发动机外部清洗剂均匀喷洒于浸湿后,搅拌车发动机及引擎室周边,待三分钟后,用纤维毛刷清洗引擎室内所能触及到的所有部件。
Directly spray the external cleaning agent on the engine of the automatic feeding mixer evenly after soaking. After three minutes, clean all the components that can be touched in the engine room with a fiber brush.
将自动上料搅拌车发动机外部清洗剂喷洒于引擎表面,操作步骤同上,周而复始,直将发动机外表清洗干净。冲洗干净的发动机用半湿性毛巾擦干,并用吸尘吸水风干机将手不易触及到的地方吸干,然后风干。
Spray the external cleaning agent on the engine surface of the automatic feeding mixer, and the operation steps are the same as above, and repeat until the engine surface is cleaned. Clean the engine, dry it with a semi wet towel, and use a vacuum suction air dryer to dry the hard to reach place, and then air dry.
使用高压水枪由自动上料搅拌车发动机侧面按从上到下的顺序将引擎室内侧及发动机外表的附着类污物冲净。用塑料橡胶保护剂对引擎室内侧的塑料橡胶部件进行上光,然后再将金属部件镀膜。
Use a high-pressure water gun to clean the attached dirt on the inside and outside of the engine according to the sequence from top to bottom. The plastic rubber parts inside the engine room are polished with plastic rubber protector, and then the metal parts are coated.
The above is about how to clean the engine of the automatic feeding mixer. I hope it will help you. If you want to know more, please click the automatic feeding mixer http://www.jfhntjbc.com Official website.