1. Unreasonable loading and unloading time parameters: automatic feeding machine can not be installed in the silo, so the industry basically has time control. How to set the time parameter? The setting of loading and unloading time is very simple. In the first use, set a small time first, and then add slowly according to the suction position. When the material reaches the material level and reaches the suction port, subtracting one second is the reasonable time. The discharging time is to ensure that one second is added after discharging. This has two advantages: one is that the material level is too high to damage the filter element; the other is that the material can be put clean every time.

2、自动上料搅拌车进料口给料量是否合理：正确的方式是物料在吸料口和空气形成一定的气物混合比，在气流的推动下均匀流入上料机。这个时候我们需要将料枪设计带有补气功能。如果物料积压时间过长可能很硬，这个时候需要在料枪上装一个振荡器，敲碎结块的物料。

2. Whether the feeding amount at the feeding port of the automatic feeding mixer is reasonable: the correct way is to form a certain air-material mixing ratio between the material at the suction port and the air, and evenly flow into the feeding machine under the driving of the air flow. At this time, we need to design the material gun with air replenishment function. If the material overstocking time is too long, it may be very hard. At this time, we need to install an oscillator on the material gun to break the agglomerated materials.
           

防止自动搅拌车上料粘罐的方法：

Methods to prevent the automatic mixer from sticking to the tank:

1、随车带上减水剂：减水剂是一种在维持混凝土坍落度不变的条件下，能减少拌合用水量的混凝土外加剂，随车携带，能对混凝土进行很好的调节。

1. Water reducer with vehicle: water reducer is a kind of concrete admixture which can reduce the water consumption of mixing under the condition of maintaining the concrete slump unchanged. It can adjust the concrete well when carried with the vehicle.

2、回厂检查罐内水量：每次出车任务完成回到站内的时候，检查储水罐内的水量，让水罐中的水随时处于满罐的状态，以备不时之需。

2. Return to the factory to check the water volume in the tank: when returning to the station after the completion of the vehicle dispatching task, check the water volume in the water storage tank to make the water in the water tank full at any time in case of emergency.

3、离厂前检查混凝土质量：可能会因为原料的不同，每一盘混凝土质量都会有变化。

3. Check the concrete quality before leaving the factory: the quality of each concrete plate may change due to different raw materials.

4、减少车辆行驶时间：混凝土运距一般在直径30千米范围以内，出车之前规划好路线以及车辆通行情况。

4. Reduce the driving time of vehicles: the concrete transportation distance is generally within the range of 30 km in diameter, and the route and vehicle traffic condition shall be planned before the vehicle is driven.

5、减少损失先卸料：如果遇到人为因素或者不可抗因素，导致长时间无法卸料的情况，一旦发现混凝土开始凝结，在报备负责人之后立刻进行卸料，以防整个罐体报废。

5. Unloading first to reduce losses: in case of long-term failure to discharge due to human factors or irresistible factors, once the concrete starts to set, the unloading shall be carried out immediately after reporting to the person in charge, so as to prevent the whole tank body from being scrapped.

以上是小编整理的关于自动搅拌车上料时防止堵料和粘罐的相关方法，希望对大家有所帮助，想要了解更多内容欢迎点击我们的http://www.jfhntjbc.com网站。

The above is about the automatic mixer truck loading to prevent blocking and stick to the relevant methods, hope to help you, want to learn more, welcome to click our http://www.jfhntjbc.com Website.