自动搅拌车若是出现故障的话，那么不是会对车辆本身造成危害，更重要的是搅拌车内的混凝土也会受到波及，若是混凝土因为自动搅拌车的故障而凝固了的话，那么将会造成非常的损失，所以为了避免这种情况的发生，当发现自动搅拌车有故障发生的时候，应当及时找出故障点进行。

　　If the automatic mixer truck breaks down, it will not cause harm to the vehicle itself, but more importantly, the concrete in the mixer truck will also be affected. If the concrete solidifies due to the failure of the automatic mixer, it will cause extraordinary losses. Therefore, in order to avoid this situation, when it is found that the automatic mixer has a fault, it should Find out the fault point and solve it in time.

　　一、罐体转动工作原理

　　1、 Working principle of can body rotation

　　发动机取力器——传动轴——油泵——马达——减速机——罐体转动

　　Engine power take-off - transmission shaft - oil pump - motor - reducer - can body rotation
       

　　二、原因分析

　　2、 Cause analysis

　　导致自动搅拌车搅拌罐停转主要有以下原因：

　　The main reasons for stopping the mixing tank of the automatic mixer are as follows:

　　1.发动机故障：发动机无法启动、取力器损坏等原因。

　　1. Engine failure: the engine can not be started and the power take-off is damaged.

　　2.上装故障：传动轴损坏、油泵故障、液压油过脏或油量不足、马达故障、减速机故障、操纵杆松脱等原因。

　　2. Upper mounting fault: transmission shaft damage, oil pump failure, hydraulic oil too dirty or insufficient, motor failure, reducer failure, control rod loose and other reasons.

　　以上是关于自动搅拌车出现故障快速排除法的相关介绍，很实用的，您肯定可以用到！

　　The above is about the automatic mixer truck troubleshooting related introduction, very practical, you can certainly use!