自动搅拌车在运行期间长期运行时会自然升高温度，但如果超过设备本身可承受的温度，则会对设备造成一定的损坏。因此，当设备温度过高时，我们需要对其进行相应的维护工作。我们来看看吧。
The temperature of the automatic mixer will rise naturally when it runs for a long time, but if it exceeds the temperature that the equipment can bear, it will cause certain damage to the equipment. Therefore, when the equipment temperature is too high, we need to carry out the corresponding maintenance work. Let's have a look.
1，防止发动机机体过热：由于环境温度较高，发动机容易过热。有必要加强发动机冷却系统的检查和维护。这包括检查水箱，恒温器，水泵，风机等，并注意及时添加。注意冷却水。当水温超过100°C时，停在阴凉处冷却，让发动机怠速，并打开引擎盖以帮助散热。
1. Prevent engine body from overheating: due to high ambient temperature, the engine is easy to overheat. It is necessary to strengthen the inspection and maintenance of engine cooling system. This includes checking the water tank, thermostat, water pump, fan, etc., and paying attention to timely adding. Pay attention to the cooling water. When the water temperature exceeds 100 ° C, stop in the shade to cool, let the engine idle, and open the hood to help heat dissipation.
2，防止发动机爆燃：夏季气温高，有时超过35°C，而在这样的季节，对于部分老化部件的汽车，自然爆炸的概率也要高得多。所以要做好预防准备。
2. Prevent engine deflagration: the temperature is high in summer, sometimes exceeding 35 ° C. in such a season, the probability of natural explosion is much higher for vehicles with some aging parts. So be prepared for prevention.
3，防止汽车油漆损坏：汽车油漆经过强烈阳光照射后，会老化，起皱，而普通美容打蜡可以起到一定的防晒效果，但因为任何车蜡都含有铋成分，长时间紫外线照射会使油漆生锈留下一点黑点。汽车蜡本身不能提高硬度和抗紫外线效果，但它会因高温而迅速失去。停车时，请注意将车停在阴凉处。
3. Prevent the damage of automobile paint: the automobile paint will be aged and wrinkled after being exposed to strong sunlight, while the ordinary beauty waxing can have a certain sun protection effect, but because any car wax contains bismuth, long-term ultraviolet radiation will make the paint rust and leave a little black spots. Car wax itself cannot improve the hardness and UV resistance, but it will lose rapidly due to high temperature. When parking, please park in the shade.
4，防止汽车轮胎爆裂：高温时，更容易穿刺，当温度过高时，轮胎容易变形，抗拉强度降低。作为轮胎本身，气压不是标准的，轮胎老化，性能减弱，或者轮胎在行驶过程中被卷成硬质金属或其他硬物，这将导致汽车突然爆裂。
4. Prevent automobile tire burst: it is easier to puncture at high temperature. When the temperature is too high, the tire is easy to deform and the tensile strength is reduced. As the tire itself, the air pressure is not standard, the tire aging, performance degradation, or the tire is rolled into hard metal or other hard objects during driving, which will cause the car to burst suddenly.
5，防止发动机润滑不良：当温度高时，油的粘度降低，抗氧化性变差，导致润滑不良。因此，请务必检查油品质量并及时添加或更换。注意及时清洁机油滤清器和散热器，确保油流畅通，散热好，尽量避免发动机过载。
5. Prevent the engine from poor lubrication: when the temperature is high, the viscosity of the oil will be reduced, and the oxidation resistance will be poor, resulting in poor lubrication. Therefore, please check the quality of the oil and add or replace it in time. Pay attention to clean the oil filter and radiator in time to ensure smooth oil flow and good heat dissipation, and try to avoid engine overload.
6，防止制动器制动器失效：制动液在高温环境下更容易蒸发汽化，在制动管内形成空气阻力，制动蹄也容易烧蚀，导致制动器失效。因此，需要经常检查和调整制动系统。在长坡期间，应注意停车制动，以确保良好的制动性能。如果发现制动毂很热，请将其停止并冷却，但不要倒入冷水以防止制动毂破裂。
6. Prevent brake failure: the brake fluid is easier to evaporate and vaporize in high temperature environment, forming air resistance in the brake pipe, and the brake shoes are easy to be ablated, resulting in brake failure. Therefore, it is necessary to check and adjust the brake system frequently. In the long slope period, attention should be paid to the parking brake to ensure good braking performance. If it is found that the brake hub is very hot, stop it and cool it, but do not pour cold water into it to prevent the brake hub from cracking.
The above is about the automatic feeding concrete mixer truck maintenance matters at high temperature, hope to help you, want to learn more, welcome to click the automatic mixer truck http://www.jfhntjbc.com Official website.
点击拨打服务热线：4008791999
