Fully automatic feeding and mixing vehicle is an important equipment in the construction industry. A good equipment also has its own working skills. We Laizhou Jufeng Machinery Co., Ltd. will instruct the correct operation mode of the equipment one after another after handing over the equipment with customers. Today, we will also briefly tell you about this equipment How to use it later.

我们在安装混凝土后要抓紧时间去施工场地，不可以在现场停留时间超过一小时，如果出现特殊情况，我们需要要求现场的负责人去及时处理。全自动上料搅拌一体车的运输塌落度也不可以小于八厘米。

After concrete installation, we should seize the time to go to the construction site, and can not stay on the site for more than an hour. If there are special circumstances, we need to ask the person in charge of the site to deal with it in time. The transportation slump of the fully automatic feeding and mixing truck should not be less than 8 cm.
           

在启动全自动上料搅拌一体车之前，我们要观察，全自动上料搅拌一体车的手柄要处于停止的位置，发动机发动后，全自动上料搅拌一体车要用低速去滚动大约10分钟左右，而且要维持液压油的温度升高到二十摄氏度以上才可以。

Before starting the full-automatic feeding and mixing vehicle, we should observe that the handle of the full-automatic feeding and mixing vehicle should be at the stop position. After the engine is started, the fully automatic feeding and mixing vehicle needs to roll at a low speed for about 10 minutes, and the temperature of the hydraulic oil should be kept above 20 ℃.

以上是关于全自动上料搅拌一体车操作注意事项的相关内容，相信大家都有所了解了，想要了解更多相关内容欢迎点击我们的http://www.jfhntjbc.com网站。

The above is about the automatic feeding mixing truck operation precautions related content, I believe you all know, want to learn more about the relevant content, welcome to click our http://www.jfhntjbc.com Website.