自动上料搅拌车作业时要注意的事情其实有很多，只有多考虑做正确的操作，才能使用的顺利，让施工质量得到有效提升，下面来讲讲在自动上料搅拌车作业时注意什么。

There are many things to pay attention to during the operation of the automatic feeding mixer. Only by considering the correct operation, can it be used smoothly and effectively improve the construction quality. Now let's talk about what to pay attention to during the operation of the automatic feeding mixer.

在自动上料搅拌车作业时，脚板应和制动踏板分离开，平放到驾驶室地板上，决不能踩在制动踏板上。自动上料搅拌车常常在凹凸不平的工地作业，如果脚总是踩在制动踏板上，机身上下窜动会造成驾驶员不轻意地踩制动踏板。一般情况下，要用控制油门减速的办法控制机况和换挡。这样既避免了频繁制动造成制动系统过热，又为自动上料搅拌车快捷的提速带来方便。

During the operation of the automatic feeding mixer, the foot plate shall be separated from the brake pedal and placed flat on the cab floor. Never step on the brake pedal. The automatic feeding mixer often works on uneven construction sites. If the foot always steps on the brake pedal, the body will move up and down, causing the driver to step on the brake pedal carelessly. In general, the engine condition and gear shifting shall be controlled by controlling the throttle deceleration. This not only avoids overheating of the braking system caused by frequent braking, but also brings convenience for fast speed increase of the automatic feeding mixer.

在自动上料搅拌车作业时，特别是在铲挖作业时，应在油门稳定情况下，用循环扳动起升和转斗操纵杆的方法使铲斗铲满物料。起升和转斗操纵杠的循环扳动就是所说的“勤”。这个过程非常重要，对耗油量的影响很大。

During the operation of the automatic feeding mixer, especially the shoveling operation, the bucket shall be filled with materials by cyclically pulling the lifting and bucket turning control levers under the condition of stable accelerator. The cyclic pulling of the lifting and bucket turning control levers is called "diligence". This process is very important and has a great impact on fuel consumption.

协调就是起升和转斗操纵杠有机的配合。自动上料搅拌车一般的铲挖过程是将铲斗平放在地面，平稳地驶向料堆。在铲斗平行铲往料堆遇阻力时，应遵循先起臂后收斗的原则。这样可以有效地避免铲斗底部受到阻力，从而能够充分发挥大的掘起力。

Coordination is the organic cooperation between the lifting and bucket control rods. The general shovel digging process of the automatic loading mixer is to place the bucket flat on the ground and drive steadily to the material pile. When the bucket is parallel to the material pile and meets resistance, the principle of lifting the boom first and then retracting the bucket shall be followed. This can effectively prevent the bucket bottom from being subjected to resistance, so as to give full play to the large digging force.

在自动上料搅拌车作业时注意什么？对于这个问题，我们已经完成了讲解，更多的注意事项需要您慢慢去发现，欢迎来我们这里http://www.jfhntjbc.com咨询！

What should be paid attention to during the operation of the automatic feeding mixer? We have finished the explanation of this problem, and more precautions need to be found out slowly. Welcome to us http://www.jfhntjbc.com consulting service