搅拌一体车在使用的过程中会遭遇很多的不好的事情，比如说刮痕。有的人觉得刮痕没有什么太大的问题，其实不然，如果搅拌一体车上的刮痕如果不及时处理的话，时间一长将会对搅拌一体车会收到损坏。

Mixer in the process of using will encounter a lot of bad things, such as scratches. Some people think that the scratch is not a big problem. In fact, if the scratch on the mixer truck is not handled in time, the mixer truck will be damaged after a long time.

1、车身老化、伤痕的处理：

1. Body aging, scar treatment:

不论什么样的搅拌一体车都会有或大或小的伤痕。如果是不太醒目的伤痕，就可以不用去管它；如果搅拌一体车只是很浅的刮伤表漆，立即用混合剂处理，擦拭方法为直线擦拭。伤痕消失后，用更细的混合剂擦拭之后再打上蜡。

No matter what kind of mixer truck will have big or small scars. If it's a less eye-catching scar, you can ignore it; If the mixer only scratches the surface paint very lightly, immediately use the mixture for treatment, and the wiping method is linear wiping. After the scar disappears, wipe it with a finer mixture and then wax it.

2、磨损伤痕的处理：

2. Treatment of wear scar:

搅拌一体车受到摩擦而造成的伤痕，我们可以为车辆涂上镀膜剂，涂抹过程要注意涂抹均匀。

For the scratch caused by friction of the mixer truck, we can apply the coating agent to the truck, and pay attention to uniform application during the application process.
               

3、保险杠伤痕的修补：

3. Repair of bumper scar:

保险杠的伤痕处理方法是将毛刺削去，坑洼部分涂上油灰使之平滑。专用油灰，准备各种颜色，选择较接近的颜色。与装载机式搅拌一体车车身同色的保险杠，喷漆很重要。

The treatment method of bumper scar is to cut off the burr and coat the potholes with putty to make them smooth. Special putty, prepare all kinds of colors, choose a closer color. It is very important to paint the bumper in the same color as the body of truck loader mixer.

4、刮伤、表漆剥落的修补：

4. Repair of scratch and paint peeling off:

较深的刮痕，可以用修饰漆进行修补。用笔尖一点一点地点上去，然后等漆完全干。

Deep scratches can be repaired with paint. Use the nib point by point and wait until the paint is completely dry.

5、较深伤痕的修补：

5. Repair of deep wounds:

很深但细长的伤痕，用彩色油灰可以修补得很好。伤痕处用砂纸，不要随便将伤痕面扩大，重要的是将脏污干净。油灰要仔细得涂抹，是指完全进入内部。然后涂上混合剂、上蜡，结束工作。

Deep but slender scars can be repaired well with colored putty. Use sandpaper at the scar. Don't enlarge the scar surface casually. It's important to clean up the dirt. The putty should be applied carefully, which means it is completely inside. Then apply the mixture and wax to finish the work.

6、凹陷的修补保养窍门：

6. Tips for repair and maintenance of sags:

凹陷处理是车身保养中叫麻烦的工作之一，要打好底子。喷漆时注意不要使涂料向周围扩散。

Sag treatment is one of the troublesome tasks in body maintenance. First of all, it is necessary to lay a good foundation. Pay attention not to spread the paint around when painting.

想要了解更多有关搅拌一体车上的知识，请关注我们的网站。

To learn more about mixer truck, please pay attention to our website.