清洁度检查:座椅、卧铺。
自动上料搅拌车新车的座椅,卧铺和其它的内饰件都应该是有塑料套的,检查车辆的塑料套是否完整,坐在座椅上感觉座椅内部是否一异物,如果可以多方调节的座椅,应该进行测试,调试过程中有无异响是否平顺,头枕也不能放过。
Cleanliness inspection: seat and sleeper. The seats, berths and other interior trim parts of the new automatic feeding mixer should have plastic covers. Check whether the plastic covers of the vehicle are complete. If you sit on the seats, you can feel whether there is a foreign object inside the seats. If you can adjust the seats in multiple ways, you should test whether there is abnormal noise during the debugging process, and whether it is smooth.
而卧铺则需要躺一下,感觉内部有无异物,上下铺都一样。在检查上卧铺折叠是否平顺,检查是否松动。仪表台检查自动上料搅拌车仪表台是否整洁,有无划痕;在不插钥匙的情况下,检查各种按钮,看看按钮是不是都可靠,有没有按一下就掉下来的“脆弱”情况。
The sleeper needs to lie down for a while and feel whether there are foreign matters inside. The upper and lower bunks are the same. Check whether the upper sleeper folds smoothly and whether it is loose. Check whether the instrument panel of the automatic feeding mixer is clean and free of scratches; Without inserting the key, check all buttons to see whether they are reliable and whether there is a "fragile" situation where they fall off once they are pressed.
再将点火开关放在打开状态,检查组合仪表的各项指示灯是否正常工作。在看看别的电子操作按钮能不能正常工作,例如:手动或电动玻璃升降器,空调调整钮,点烟器等等,一个都别落下。
Put the ignition switch on again and check whether all indicators of the combination instrument work normally. Check whether other electronic operation buttons can work normally, such as manual or electric window regulators, air conditioning adjustment buttons, cigarette lighters, etc. Don't drop any of them.
杂物箱现在自动上料搅拌车的杂物箱很多,随便那个地方都用,而且还很“隐蔽”,所以要避免遗漏,检查封闭式的杂物箱开启、关闭是否顺畅,也可以检查里面是否有一些“不可告人的秘密”带带是保证驾驶人员生命的重要部分,所以一定要严格检查,拉开、自动回收、锁止的可靠性,应该平稳顺畅。
Glove box There are a lot of glove boxes in the automatic feeding mixer now. They are used anywhere, and they are also "hidden". Therefore, to avoid omission, check whether the closed glove box can be opened and closed smoothly, and also check whether there are some "hidden secrets" in it. Seat belts are an important part of ensuring the safety of drivers. Therefore, we must strictly check the reliability of opening, automatic recycling, and locking, It should be smooth and smooth.
模拟并检查带在发生作用时的可靠性。灯光甭管什么近光灯、远光灯、转向灯、刹车灯……只要车上能亮的都仔细检查一遍,灯光应该明亮、稳定。别是大灯只亮一边的“独眼”,或是转向灯不闪。
Simulate and check the reliability of the safety belt when it works. The light should be bright and stable, regardless of the low beam, high beam, turn signal and brake light. Don't be a "one eyed" headlight with only one side lit, or a turn signal that doesn't flash.
雨刮系统检查自动上料搅拌车雨刮器喷水系统、刮水系统是否正常,别一盆水泊上来雨刮器刮的还没蒸发的快呢。雨刮器在刮水应没有“吱嘎……吱嘎……”的声音,如果有说明雨刮片已经老化。
The wiper system shall check whether the sprinkler system and wiper system of the automatic feeding mixer are normal. Don't park a basin of water and the wiper can't evaporate quickly. There should be no "squeak... squeak..." sound when the wiper is wiping. If there is, it means that the wiper blade is aging.
If you want to buy a mixer, you should pay special attention to the interior inspection. This is the end of the question. If you have any questions about this, please come to our website http://www.jfhntjbc.com Look!