可能我们经常会在媒体上看到,某个地方又出现
自动搅拌车翻车之类的信息,确实也让人觉得惋惜,这也给很多搅拌车司机一个警示吧,当然,我们也不能盲目的去判别其中的原因,下面我们一起分析原因吧。
We may often see in the media that there is information such as the overturning of automatic mixer truck in some place, which is indeed regrettable. It also gives a warning to many mixer truck drivers. Of course, we can not blindly identify the reasons. Let's analyze the reasons.
一、司机操作不当。为什么说司机操作不当呢?搅拌车是一种特殊车辆,在我们的历史也就十来年大都数司机都是开搅拌车的新手。好多司机开货车都十几年,可是开水泥搅拌车都是新手。自动搅拌车跟普通的货车不同,因为在行驶过程中水泥搅拌罐在不停的旋转。如果在转弯或者路况不好的情况下,不控制好车速和罐体的转速就容易翻车,这个跟车的品质没有关系。
1、 Improper operation by the driver. Why is it that the driver is not operating properly? Mixer truck is a special vehicle. In our history, most of the drivers are novices in driving mixer truck. Many drivers have been driving trucks for more than ten years, but they are new to driving cement mixer trucks. The automatic mixer is different from the ordinary truck because the cement mixing tank rotates continuously during the driving process. If you don't control the speed and the rotation speed of the tank when turning or the road conditions are bad, it is easy to overturn. This has nothing to do with the quality of the car.
二、路况恶劣。好多水泥搅拌车在工地上使用,有的工地路况特别恶劣。上次听一个客户说一个工地地面堆了1米多的石子,有的地方速度慢了很容易把车陷进去,须快速的冲过。自动搅拌车本身就是一种低速行驶的车辆。如果碰到这样的工程宁可不要接这样的活,还没有做多久车就翻了,就亏大了。
2、 The road condition is bad. Many cement mixer trucks are used on the construction site, and the road conditions on some construction sites are particularly bad. Last time I heard a customer say that there were more than 1 meter of stones on the ground of a construction site. In some places, the speed was slow and it was easy to sink the car, so it had to rush through quickly. The automatic mixer truck itself is a low-speed vehicle. If you encounter such a project, you'd rather not take on such a job. You'll lose a lot if the car overturns before long.
三、如何避免翻车。水泥搅拌车重载时一定要注意,发动机转速在1000-1400转/分范围内工作,以使发动机有大扭距,在运送混凝土过程中,车速不得超过40km/h,以保行车。转弯时一定要在直路上先减速,然后再转弯。
3、 How to avoid rollover. When the cement mixer truck is overloaded, it must be noted that the engine speed is within the range of 1000-1400 rpm, so that the engine has a large torque. In the process of transporting concrete, the speed shall not exceed 40km / h to ensure driving safety. When turning, be sure to slow down on the straight road before turning.
It is hoped that more and more mixer truck employees will be safer in the operation process. As an operator, you should learn more about the relevant precautions, protect your own safety colleagues, avoid problems, and pay attention to us http://www.jfhntjbc.com Learn more!