The transmission of the automatic feeding mixer is also a very important part. How should we detect the oil level and oil quality in the transmission?

在对变速器进行检查或故障诊断前，要对变速器油面和油质进行检查。把选挡手柄放在P位，将发动机在怠速时少运转数分钟，油液达到正常工作温度，汽车必须停放在水平路面上，这样才能确保在差速器和变速器之间的油面高度正常、稳定。

Before checking or troubleshooting the transmission, the transmission oil level and oil quality should be checked first. Put the selector lever in position P, run the engine for at least several minutes at idle speed, and the oil reaches the normal working temperature. The vehicle must be parked on the horizontal road, so as to ensure the oil level height between the differential and the transmission is normal and stable.

带油位标尺的自动变速器油位检查的具体方法如下：

The specific methods for the oil level inspection of automatic transmission with oil level gauge are as follows:

1、将自动上料搅拌车停放在水平地面上，并拉紧手制动。

1. Park the automatic feeding mixer on the horizontal ground and tighten the hand brake.        

2、让发动机怠速运转数分钟。

2. Allow the engine to idle for several minutes.

3、踩住制动踏板，将操纵手柄拨倒挡、前进挡等位置，并在每个挡位上停留几秒钟，使液力变矩器和所有换挡执行元件中都充满液压油。然后将操纵手柄拨停车挡位置。

3. Press the brake pedal, move the joystick to the reverse and forward gears, and stay in each gear for a few seconds to fill the hydraulic torque converter and all gear shifting actuator with hydraulic oil. Then, move the joystick to the park position.

4、从加油管内拨出自动变速器油尺，将擦干净的油尺全部插入加油管再拔出，检查油尺上的油面高度。

4. Pull out the automatic transmission oil dipstick from the filler pipe, insert all the clean dipstick into the filler pipe and pull it out. Check the oil level height on the dipstick.

本文由自动上料搅拌车整理提供，感谢您的阅读，希望以上内容对您有所帮助，如您想了解更多精彩内容请点击我们的官网：http://www.jfhntjbc.com。

This article is provided by the automatic feeding mixer. Thank you for reading. I hope the above content will help you. If you want to learn more wonderful content, please click our official website: http://www.jfhntjbc.com .