您好,欢迎光临莱州聚峰机械有限公司网站! 主营自动搅拌车,搅拌一体车,自动上料搅拌车等各种规格的产品。

自动上料搅拌车生产厂家

点击拨打服务热线:4008791999

您的位置:首页 - 新闻中心 > 行业资讯

自动搅拌车制动系统故障怎么办?

发布时间:2020-11-06 来源:http://www.jfhntjbc.com/ 浏览量:0

概述:自动搅拌车制动系统的重要性,自动搅拌车踩刹车时的振动大多发作在旧车身上,由于磨损,混凝土搅拌机制动盘的外表光亮度在一定水平上不对齐
自动搅拌车制动系统的重要性,自动搅拌车踩刹车时的振动大多发作在旧车身上,由于磨损,混凝土搅拌机制动盘的外表光亮度在一定水平上不对齐,因而倡议依据状况选择采用车床光盘技术研磨,或改换制动垫(用于旧混凝土搅拌机)。
The importance of the brake system of the automatic mixer. Most of the vibration of the automatic mixer when stepping on the brake occurs on the old vehicle. Due to wear and tear, the surface brightness of the brake disc of the concrete mixer is not aligned at a certain level. Therefore, it is suggested to select the lathe disc technology for grinding or replace the brake pad (for the old concrete mixer) according to the situation.
自动搅拌车的制动装置即将停止时,方向盘总是偏转到一侧。事实上,这种情况通常被称为"偏置制动"。造成故障的主要原因是小型混凝土搅拌机制动系统的左右泵之间的力不均匀。在驱动过程中,由于小型混凝土搅拌机制动盘的快速转动速度,泵的不均匀作用与快速摩擦之间的差别很小,我们很难感觉到它。
When the automatic mixer brake is about to stop, the steering wheel always deflects to one side. In fact, this condition is often referred to as "offset braking.". The main cause of the failure is the uneven force between the left and right pumps of the brake system of the small concrete mixer. In the driving process, due to the rapid rotation speed of the brake disc of the small concrete mixer, the difference between the uneven action of the pump and the rapid friction is very small, so we can hardly feel it.
               自动搅拌车
热车需要十多分钟才能启动小型混合器。自动上料搅拌车的制动系统由发动机提供压力推动卡钳以夹紧制动盘(盘式制动器),或将制动盘推到与制动鼓(鼓式制动器)的摩擦处。因此,就像在上述情况下,可能是提供压力的输油管道没有压力,导致无法及时提供制动力。在这种情况下,应检查制动主泵的真空动力皮管和小型混凝土搅拌机发动机的脱落是否开裂或松动。
It takes more than ten minutes for the hot car to start the small mixer. The brake system of the automatic charging mixer is provided with pressure from the engine to push the calipers to clamp the brake disc (disc brake) or push the brake disc to friction with the brake drum (drum brake). Therefore, as in the above case, it may be that the pipeline providing the pressure has no pressure, resulting in the failure to provide the braking force in time. In this case, the vacuum power hose of the brake main pump and the engine of the small concrete mixer should be checked for cracking or loosening.
自动搅拌车制动不回位,踩刹车踏板,踏板不上升,无阻力,这种现象是制动器不回位,需要判断制动液是否丢失,制动泵、管路和接头是否漏油,主泵和泵部件是否损坏。
The brake of the automatic mixer does not return to its original position. If the brake pedal is pressed, the pedal will not rise and there is no resistance. This phenomenon is that the brake does not return to its original position. It is necessary to judge whether the brake fluid is lost, whether the brake pump, pipeline and connector are leaking, and whether the main pump and pump components are damaged.
以上是关于搅拌车制动系统故障怎么办的介绍,希望对大家有所帮助,如您想要了解更多资讯内容请点击:http://www.jfhntjbc.com
The above is about how to deal with the brake system failure of the mixer. I hope it will be helpful for you. If you want to know more information, please click: http://www.jfhntjbc.com 。

截屏,微信识别二维码