自动上料搅拌车在夏天的使用可以说是一个考验，毕竟夏季气温升高，混凝土更容易凝结，更容易造成搅拌机水温过高。那么，搅拌机水温偏高的原因除了高温还有哪些呢？让我们看看。

The use of automatic loading mixer in summer can be said to be a test. After all, with the temperature rising in summer, the concrete is easier to set, which is more likely to cause the mixer to have too high water temperature. So, what are the reasons for the high water temperature of the mixer besides high temperature? Let's see.

1、冷却风扇不正常运转时，搅拌机不容易出现水温高的问题，但如果冷却风扇出现问题，水温容易升高。

1. When the cooling fan does not operate normally, the mixer is not prone to high water temperature, but if the cooling fan has problems, the water temperature is easy to rise.

2、如果温控器损坏，很容易造成水温过高。此时，需要更换恒温器。更换方法：先拆下节温器，堵住小循环，保证冷却液全部被水箱散去；安装新温控器时，注意水孔。不行的话，用6mm钻头钻一个，一个打标，一个打标，车辆加热的时候，温控器两边有温差，可以让温控器随着水温准确开启。

2. If the thermostat is damaged, it is easy to cause the water temperature to be too high. At this time, the thermostat needs to be replaced. Replacement method: first remove the thermostat, block the small circulation, and ensure that all the coolant is dispersed by the water tank; Pay attention to the water hole when installing a new thermostat. If not, use a 6mm drill bit to drill one, mark one, and mark the other. When the vehicle is heated, there is a temperature difference on both sides of the thermostat, which can enable the thermostat to open accurately with the water temperature.

3、水箱堵塞也会导致水温升高。方法：外部堵塞物应用水或空气；内部堵塞会影响冷却液循环并产生压力。这时候有两个结果：一是水箱漏水，二是高速行驶时水温特别高。

3. A blocked water tank can also cause the water temperature to rise. Solution: remove the external blockage with water or air; Internal blockage will affect the coolant circulation and generate pressure. At this time, there are two results: one is that the water tank leaks; the other is that the water temperature is particularly high when driving at high speed.

4、水泵出现故障的原因有二：一是自动上料搅拌车的叶轮打滑或卡死，造成皮带断裂；二是叶轮变形。

4. There are two reasons for the failure of the water pump: first, the impeller of the automatic feeding mixer slips or gets stuck, causing the belt to break; Second, the impeller is deformed.

5、气缸损蚀。气缸损蚀一般有四方面的原因：燃烧室与水道冲，这时会从排水管排水或排白烟，造成水箱经常性缺水；水道与油道冲（机油有水呈白色）；水道与水道冲，造成缸体散热不良，尤其在高速时影响更大；水道堵塞也会引起气缸损蚀。

5. Cylinder is corroded. There are generally four reasons for cylinder erosion: the combustion chamber and water channel are flushed, and at this time, water or white smoke will be discharged from the drain pipe, resulting in frequent water shortage in the water tank; Water channel and oil channel flushing (the oil is white with water); The water channel and water channel collide, resulting in poor heat dissipation of the cylinder block, especially at high speed; Clogged waterways can also cause cylinder erosion.

所以说夏天使用搅拌车工作时需要注意水温高的问题，否则会对搅拌机造成不可逆转的影响。更多关于该机器使用的内容就来关注我们网站www.jfhntjbc.com了解吧！

Therefore, attention should be paid to the problem of high water temperature when using the mixer in summer, otherwise it will have an irreversible impact on the mixer. For more information about the use of this machine, please pay attention to our website www.jfhntjbc Www. 68mn!