您好,欢迎光临莱州聚峰机械有限公司网站! 主营自动搅拌车,搅拌一体车,自动上料搅拌车等各种规格的产品。

自动上料搅拌车生产厂家

点击拨打服务热线:4008791999

您的位置:首页 - 新闻中心 > 公司新闻

混凝土搅拌车放料杆如何操作?

发布时间:2021-05-10 来源:http://www.jfhntjbc.com/ 浏览量:0

概述:在运输混凝土时,通常不使用普通卡车,而在搅拌时使用混凝土搅拌车来运输混凝土。 这不仅可以及时搅拌混凝土,防止混凝土变干,还可以更安
在运输混凝土时,通常不使用普通卡车,而在搅拌时使用混凝土搅拌车来运输混凝土。 这不仅可以及时搅拌混凝土,防止混凝土变干,还可以更地将其移动到目的地。 如何操作混凝土搅拌车其排放杆? 该知识将在以下内容中介绍:
In the transportation of concrete, ordinary trucks are usually not used, but concrete mixer truck is used to transport concrete when mixing. This can not only mix the concrete in time to prevent it from drying, but also move it to the destination more safely. How to operate the discharge rod of concrete mixer truck? This knowledge will be introduced in the following contents:
1.在启动混凝土搅拌车之前,应将搅拌杆置于“空挡”位置;
1. Before starting the concrete mixer, put the mixing rod in the "neutral" position;
2.启动后,应将搅拌杆置于“卸载”位置,将水倒入桶中;
2. After starting, the mixing rod should be placed in the "unloading" position, and the water should be poured into the bucket;
                自动上料搅拌车
3.装载时,搅拌操作杆应置于“装载”位置;
3. When loading, the mixing operating rod should be placed in the "loading" position;
4.运输前,混凝土搅拌机卸料箱必须固定在“行驶”位置以防摇摆;
4. Before transportation, the concrete mixer discharge box must be fixed in the "driving" position to prevent swing;
5.操作操纵杆时,应在“中性”位置停留一会儿,然后再移
5. When operating the control lever, stay in the "neutral" position for a while, and then move to the "neutral" position
操作排料杆时,请严格遵循以下步骤:对于混凝土搅拌车的排料杆,只有用户正确进行操作,才能让车的效率更高,大家在操作过程中一定要找准位置。
When operating the discharging rod, please strictly follow the following steps: for the discharging rod of the concrete mixer, only the user can operate it correctly, can the efficiency of the truck be higher, and we must find the right position in the operation process.

截屏,微信识别二维码