专用车的车型有很多,比方轿运车、搅拌车、随车吊、清障车、油罐车等等,在专用车的运用过程中可能会呈现发动机机油进水的状况,此时该怎样处置呢?一同随
自动上料搅拌车厂家来看一下吧。
There are many types of special vehicles, such as sedan cars, mixer cars, truck mounted cranes, obstacle removal cars, oil tank cars, etc. during the use of special vehicles, the engine oil may get into the water. What should be done at this time? With the automatic feeding mixer manufacturers to see it.
一、发动机机油进水后会有哪些表现呢?
1、 What is the performance of the engine oil after water entry?
1. 假如车辆的发动机机油进水比拟大,机油的油面会升高,我们能够察看机油的油尺,一旦机油中含水量过高,那么光滑油的液面就会超出油尺标注的范围。
1. If the water in the engine oil of the vehicle is relatively large, the oil level of the engine oil will rise. We can check the dipstick of the engine oil. Once the water content in the engine oil is too high, the level of the smooth oil will exceed the range marked on the dipstick.
2. 假如发动机的某些部件损坏,那么发动机冷却液就会进入光滑系统,而这时常常也会在冷却液中发现机油,所以检查发动机冷却液中能否含有机油也是检验机油能否进水的一个办法。
2. If some parts of the engine are damaged, the engine coolant will enter the smooth system, and the engine oil is often found in the coolant. Therefore, checking whether the engine coolant contains engine oil is also a way to check whether the engine oil can enter the water.
3. 自动上料搅拌车认真察看机油的外观状态,也能够看出机油中能否含有水,不含水的机油呈现的是半透明的油质亮色,而含有水的机油会呈现出不透明的褐色或土黄色,假如机油中含有水分,发动机运转一段时间后,机油就会呈现乳白色。
3. The automatic feeding mixer carefully looks at the appearance of the engine oil, and can also see whether there is water in the engine oil. The engine oil without water presents translucent bright oil color, while the engine oil with water presents opaque brown or yellowish. If the engine oil contains water, the engine oil will appear milky white after running for a period of time.
二、机油进水普通是哪些缘由形成的呢?
2、 What are the common reasons for the formation of oil water?
1. 机油散热器损坏会招致机油进水,机油散热器损坏,散热器管路发作破损,散热器外部的水会浸透到机油散热器里面,从而招致机油进水。
1. If the oil radiator is damaged, the oil will enter the water. If the oil radiator is damaged, the radiator pipe will be damaged, and the water outside the radiator will soak into the oil radiator, which will cause the oil to enter the water.
2. 发动机缸套密封圈呈现损坏也会招致机油进水。湿式缸套直接与冷却水接触,缸套下部的密封圈能够有效的避免机油和冷却水的渗漏,发动机长时间运转以后,密封圈是很容易失效的,缸套密封圈损坏是机油进水的一个主要缘由,所以,在检查机油进水缘由的时分,一定要记得检查缸套密封圈能否完好。
2. The sealing ring of engine cylinder liner is damaged, which will also lead to water in the engine oil. The wet cylinder liner is in direct contact with the cooling water. The sealing ring at the lower part of the cylinder liner can effectively avoid the leakage of oil and cooling water. After the engine runs for a long time, the sealing ring is easy to fail. The damage of the sealing ring of the cylinder liner is one of the main causes of oil water inflow. Therefore, when checking the cause of oil water inflow, we must remember to check whether the sealing ring of the cylinder liner is intact.
3. 气缸垫损坏也会招致机油进水,发动机汽缸垫的作用是密封各气缸以及各气缸对应的水道和机油油道,从而防止机油进水,假如气缸垫发作损坏,水循环速度比拟快,水道内的水就会流进机油油道,形成机油进水,在每次拆卸完发动机后,一定要运用新的汽缸垫,以免汽缸垫损坏形成机油进水,从而招致发动机损坏。
Three If the cylinder gasket is damaged, the water in the water channel will flow into the oil channel, forming oil water. After each disassembly of the engine, a new cylinder gasket must be used, In order to avoid cylinder gasket damage, the formation of oil water, resulting in engine damage.
The above is the introduction of how to deal with the water in the engine oil of the special truck for the automatic feeding mixer. I hope it can help you. For more wonderful content, please click our website: http://www.jfhntjbc.com 。